Description
Your amp will sound better than the factory system
You can make a less-than-ideal factory system actually sound premium by upgrading the weak factory amplifier with a more powerful aftermarket amp. PAC’s AmpPRO interface consists of a module and a vehicle-specific T-harness that make the job much easier. Now, you can install an amplifier of your own without losing any of your vehicle’s factory audio features like warning chimes, navigation prompts, and Bluetooth functions.
Simple to install
The package’s T-harness plugs into the factory radio and vehicle harness. The small module fits behind the dash, converting your radio’s speaker outputs into six preamp-level outputs ready for connection to your amp. The factory amplifier needs to be left connected in the vehicle. The factory radio controls, such as volume, balance, and fade, will work as before for your front and rear speakers. A separate wired remote level control lets you adjust the volume of the subwoofer channels from your front seat. An optional add-on module, PAC’s APA-TOS1 adapter, provides an optical digital output for your high-end digital processors and amplifiers to handle.
An app for tweakers
After downloading the AmpPRO PC App and connecting to your Windows-run PC via USB, you can access the factory 3-band parametric equalizer (EQ) and customize the tone of your system to perfection. The app also lets you adjust chime volume, the system’s minimum volume level, and update the product firmware when needed.
Important Note: This AmpPRO interface simplifies the installation of a car amplifier (not included). You’ll also need to purchase anything required to install your new amp: an amp wiring kit, speaker wire (to replace factory wiring), and RCA cables.
Product highlights:
amplifier integration module and T-harness
add an aftermarket amplifier without removing factory amp
works with select 2014-up Chrysler, Dodge, Jeep, RAM, and Maserati vehicles
6-channel RCA outputs (front, rear, subs)
switchable 5- or 4-volt RMS output
retains factory radio controls and audio features
wired remote level control for sub channels
remote turn-on lead for amplifiers
AmpPRO PC App, available from PAC, lets you adjust minimum and chime volumes and 3-band EQ via your Windows-run PC
Vehicle Compatibility:
The PAC AmpPRO AP4-CH41 (R.2) amplifier integration interface is compatible with select versions of the following 2013-2022 Chrysler, Dodge, Jeep, Maserati, & Ram vehicles:
Chrysler
200 (2015-2017) – All trims
300 (2015-2022) – All trims
Pacifica (2017-2022) – All trims
Dodge
Challenger (2015-2022) – All trims
Charger (2015-2022) – All trims
Durango (2021) – All trims (10.1″ & 8.4″ screens)
Durango (2014-2020) – All trims
Ram Truck (2013-2021) – All trims
Ram Truck (2022) – Non-Classic
Jeep
Wrangler (2018-2022) – JL trims
Wrangler (2021-2022) – 4XE trims
Wrangler Unlimited (2018-2022) – JL trims
Gladiator (2020-2022) – All trims
Cherokee (2015-2021) – All trims
Grand Cherokee (2014-2021) – All trims
Grand Cherokee (2022) – WK trims
Maserati
Quattroporte (2017) – All trims
Levante (2018) – All trims
Ram
Ram Truck (2013-2021) – All trims
Ram Truck (2022) – Non-Classic
Notes:
Jeep Cherokee, Chrysler 200, and Maserati vehicles must be equipped with a factory amplifier as the AP4-CH41 (R.2) cannot reprogram the factory radio to think that an amplifier is present.
In non-amplified vehicles, the AmpPRO is only compatible in vehicles equipped with the 7″ or 8″ factory radio screens; except for the Jeep Wrangler and Gladiator which is supported for 5″, 7″, and 8″ factory radio screen models.
2019 Ram Trucks (non-Classic), 2015-2016 Jeep Grand Cherokee, and 2017-2019 Pacifica vehicles have an ANC module that will need to be bypassed.